Print Bed Adhesion Problem Solver

Help me solve bed adhesion problems with my 3D prints.

Printer Setup:
- Printer model: [brand and model]
- Build surface: [glass/PEI/BuildTak/magnetic flex plate/other]
- Surface condition: [new/worn/damaged/recently cleaned]
- Bed leveling: [manual/mesh/auto/type]
- Heated bed: [yes/no]

Material Information:
- Filament type: [material]
- Brand: [name]
- Filament age: [fresh/old/stored how]
- Filament diameter measured: [mm]

Print Settings:
- First layer height: [mm]
- First layer speed: [mm/s]
- First layer temperature: [nozzle/bed]
- First layer line width: [mm or percentage]
- First layer fan: [percentage]
- Brim/raft: [type and width]

Adhesion Aids Used:
- [Glue stick/hairspray/tape/none/other]

Problem Description:
- Issue type: [warping/lifting corners/not sticking at all/releases mid-print]
- When it occurs: [immediately/after X layers/random]
- Part geometry: [size, first layer area, thin parts]
- Environment: [room temp, drafts, enclosure]

Please provide:
1. Root cause diagnosis
2. Immediate fixes to try
3. Optimal bed preparation method
4. First layer settings adjustment
5. Adhesion aid recommendations
6. Long-term solutions
7. Preventive measures